Box plans - Skateboarding - http://maxpages.com/sk8erzworld/Box

You sould do 4 frames like this one. 2 of the frames are for the long of the table and the otHer 2 are for the width of it, so one pair must be much longer than the other, but remember that the height is the same for all four. It uses 5x5cm wood. Do as it is indicated in the image, to join the wood you may need to use very long nails and for it to be stronger you may want to use glue.

Step 2

Now that you have the frames together making the structure of the table you need to put some ribs (do not leave more than 10 cm between each rib,because you don't want the box to be weak.)

Step 3

Get a piece of plywood(that will cover the box) and screw it to each of the ribs.

Step 4

Insert an iron angle; for slides. The angle should be screwed.

Step 5

At last put Masonite over the plywood so the iron angle will be the exact height as the masonite. You must screw it over the plywood and to a rib.

Final
When u are finished your table should look like this.

Sign Guestbook

View Guestbook

if you have any suggestions for my site e-mail me at sk8borderdude@hotmail.com

Visitors: 02517

Page Updated Wed Nov 7, 2001 11:07pm EST