Rails - Here is what you are going to build this took me about 2 weeks. - Sports

WELDED RAIL ONLY
(welder needed) 1. First you want to make sure you have a welder($130.00-$600.00).
2.Then you want to get a steel rail that is sturdy and strong about 6'.6".
3.Get three flat steel plates if you want a flat base.
4.If you dont want a flat base then get another rail that is strong exactly 6'.
5.Then cut the rail four times two of the cut rail should be 2' then two more of the cuts should be 1'.
6.The two 2' cut rails will be the base.
7.Weld the base onto the smaller cut rail and the same to the other base.
8.The last and hardest step you want to lay the large rail on the ground.Now you need someone helping
you, have the other person hold onto the base up-side-down. go in on the rail 6" and weld the base onto
the rail on both sides then go back and reweld for extra safty.
10.Now lay the rail hard suface then have fun!

SCREW AND WOOD
(drill needed) 1. Make sure you have a drill and drill bit.
2.Get a square rail as long as you want.
3.Then get square wood blocks and make sure they are long so the rail doesn't roll.
4.Take a drill bit a drill through the steel into the wood.
5.Drill in a strong screw into the hole of the rail and the base.
6.Set it up and have fun!

Ive built many different rails and I learned that the stronger the better. Dont use a round rail and it sometimes better to build a center base.

Sign Guestbook

View Guestbook

Visitors: 00145

Page Updated Tue Mar 6, 2001 8:01pm EST