PCB dry-etch unit is an extremely valuable affordable solution for electronic design professionals as well as hobbyists. Its simple design and easy operation will provide many years of service for printed circuit board prototyping without the use of dangerous chemicals. It simply copies any pattern drawn by hand or printed by computer on white paper. The image is electronically transferred by X/Y positioning system, sustaining a high speed motor cutter. This simple method converts the image into precision fine cut to any type of copper PC board. Clean cutting is enabled by Micro-Vacuum system, instantly removing all shaved particles. It is also possible to directly duplicate an existing PCB. ElectroCut is designed for hands-free operation. Its adjustable speed will produce a PCB from courser cut at higher scan speed to very fine cut at low speed. Cutting time will depend on the size of the PCB and cutting speed selected. It could be anywhere from two minutes to one hour! ElectroCut will save many hours that can be devoted to other design work! Just set it and forget it!
The cutting dimensions are ranging from one to seventy square inches for both, single or double sided PCBs.
Unit Size:
Length - 18"
Width - 13"
Height - 5"
Power requirement:
120 or 220 V / AC
Consumption:
60 W
For more information and prices call 1 800 727-6340 or Email to: edico@adelphia.net
To view photo, please click on link below:
http://www.homemartdesigns.com/index.cfm/Electronic_Design_Innovations
|