|
Here are a few ideas that you can think about when building your own fingerboard park
1. Use some balsa wood to make all kinds of ramp. If you want to bend the wood then you need to run it in hot water so it will bend easily. Use hot glue, wood glue, or super glue to put your design together.
2. Use old hangers for coping and for grind rails.
3. If you want to make a trash can then get a 35mm film holder and spraypaint it with chrome spray paint. You can also make it a toxic waste can if you sprayit with yelloy and orange and draw the word Toxic on it. These are cool little easy to make obstacles.
4. You can use cardboard to make ramps, but make sure you weigh the ramps down because cardboard is really light.
Remember that you don't have to go out and buy skatepark ramps at your local skateshop or toy store, but you can make your own without spending much money at all.
If you have any other homemade skatepark suggestions then write them to me when you sign my guestbook. |
|
