JET - Silicone and Non Silicone Base Mould Release Spray for Injection Moulding Machines - Business Opportunities - http://maxpages.com/4pcorporation/Mould

Type : Silicone Polymer

Spray rate : 0.7 to 1.0 gram / second

Thermal stability : -50 to 400 o C

Covering area : 21 TO 23 Sq. cm @ 9 to 10 inches
between the nozzle and the mould.

Spray cone angle : 30 to 40 deg

Coating thickness : 3 to 4 microns @ 9 to 10 inches
between the nozzle and the mould.

Packing : 600 ml aerosol can.
Packed in carton, containing 25 cans.

Toxicity : Contents are non toxic.

Performance : Non sticky, low surface tension
(high film forming capacity), and excellent
flow friction coupled with lubricating qualities
of the formulation helps the shop floor men to
increase productivity.

For moulding Polyethylene, Polypropylene, HIPS,
Acrylics, Polyurethanes, Bakelite, Polyesters,
Cellulose, SBR, Natural Rubber, Nitrile, Neoprene,
Fluorosilicone Polymers, etc.

Material safety data : Contents under pressure.
Do not expose to higher temperature or flame.
Shall be disposed carefully when the content is
emptied.
Do not drop the can.

JET FA
Non Silicone Mould Release Spray

Type : Non - Metallic fatty chemical

Spray rate : 0.5 to 0.7 gram / second

Thermal stability : -50 to 300 o C

Covering area : 21 TO 23 Sq. cm @ 9 to 10 inches
between the nozzle and the mould.

Spray cone angle : 30 to 40 deg.

Coating thickness : 2 to 3 microns @ 9 to 10 inches
between the nozzle and the mould.

Packing : 600 ml aerosol can.
cked in carton containing 25 cans.

Toxicity : Contents are non toxic.

Performance :Non sticky, low surface tension
(high film forming capacity), and excellent
flow friction coupled with lubricating qualities
of the formulation helps the shop floor men
to increase productivity. This formulation is
used if the finished object is to be painted,
printed, plated, or hot stamped.

For moulding ABS, SAN, Nylon, HIPS, Epoxy,
Polycarbonate , Teflon , PPS, Alkyds, etc.

Material safety data : Contents under pressure.
Do not expose to higher temperature or flame.
Shall be disposed carefully when the content
is emptied.
Do not drop the can.

Four-P International Pvt Ltd

No.6, Esplanade, 3rd floor,
Indian Chamber Building
Chennai 600 108
India
Phones-91 44 2533 1110/2
Fax-91 44 2533 2176

Now

Hyderabad Branch-Mr Murthy-98490 66674
Madurai Branch-Mr Manoharan-98414 20683

Porter Cable CFBN125A
Brad Nailer/Compressor Combo Pack

Want to Change your name ? Click here

Visitors: 06940

Page Updated Wed Jul 4, 2007 1:32pm EDT